Team,
I have 2 questions here:
Question1:
I would expect the config on R6 and R9 for the multilink PPP to look somehow
like below. However, on both R6 and R9 part of config commands seem
like missing...
R6
interface Mul1
ip add 150.50.96.6 255.255.255.0
ppp multilink group1
ppp multilink
no shut
interface s0/2/0
encap ppp
ppp multilink group 1
ppp multilink
no shut
interface s0/2/1
encap ppp
ppp multilink group 1
ppp multilink
no shut
R9
interface Mul1
ip add 150.50.96.9 255.255.255.0
ppp multilink group1
ppp multilink
no shut
interface s0/2/0
encap ppp
ppp multilink group 1
ppp multilink
no shut
interface s0/2/1
encap ppp
ppp multilink group 1
ppp multilink
no shut
Question 2:
In the same task, when it comes to the serial link between R7 and R8, the
encapsulation is PPP. If I was to use the default encapsulation (HDLC) would
that be OK? I see the requirement for the secure mode authentication, [chap],
but is there any specific requirement to use PPP encapsulation?
Thanks
Bauke
__________________________________________________________________
The new Internet Explorer® 8 - Faster, safer, easier. Optimized for Yahoo!
Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
