1) Both configurations would work.  The configuration in the PG is the
minimal configuration whereas yours is a bit more complete.  Either would be
fine
2) You can't run CHAP over HDLC as it is a function of PPP authentication.

On Sun, Jan 10, 2010 at 11:31 PM, Bauke Dzavhale <
[email protected]> wrote:

>  Team,
>
>
> I have 2 questions here:
>
> *Question1:*
> I would expect the config on R6 and R9 for the multilink PPP to look
> somehow like below. However, on both R6 and R9 part of config commands seem
> like missing...
>
> R6
> interface Mul1
> ip add 150.50.96.6   255.255.255.0
> ppp multilink group1
> ppp multilink
> no shut
>
> interface s0/2/0
> encap ppp
> ppp multilink group 1
> ppp multilink
> no shut
>
> interface s0/2/1
> encap ppp
> ppp multilink group 1
> ppp multilink
> no shut
>
> R9
> interface Mul1
> ip add 150.50.96.9   255.255.255.0
> ppp multilink group1
> ppp multilink
> no shut
>
> interface s0/2/0
> encap ppp
> ppp multilink group 1
> ppp multilink
> no shut
>
> interface s0/2/1
> encap ppp
> ppp multilink group 1
> ppp multilink
> no shut
> *Question 2:*
> In the same task, when it comes to the serial link between R7 and R8, the
> encapsulation is PPP. If I was to use the default encapsulation (HDLC) would
> that be OK? I see the requirement for the secure mode authentication,
> [chap], but is there any specific requirement to use PPP encapsulation?
>
> Thanks
>
>
> Bauke
>
> ------------------------------
> Instant message from any web browser! Try the new * Yahoo! Canada
> Messenger for the Web 
> BETA*<http://ca.messenger.yahoo.com/webmessengerpromo.php>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>


-- 
Regards,

Joe Astorino CCIE #24347 (R&S)
Sr. Technical Instructor - IPexpert
Mailto: [email protected]
Telephone: +1.810.326.1444
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130

IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service
Provider) Certification Training with locations throughout the United
States, Europe and Australia. Be sure to check out our online communities at
www.ipexpert.com/communities and our public website at www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to