-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

I might be wrong but isn't load balancing based on CEF which does the
balancing on a hash of the Source/Destination IP, thereby it would follow
only one of the routes each time as the source/destination IP hash does not
change.

 

Bradley

 

From: [email protected]
[mailto:[email protected]] On Behalf Of Taqdir Singh
Sent: 12 January 2010 15:32
To: [email protected]
Subject: [OSL | CCIE_RS] Static route Selection

 

Hi All,

I have one doubt in static route selection.
Please see my attached  network diagram.

Between R1 and R2, one is serial link and one is ethernet.

If I configure R1 as

ip route 2.0.0.0 255.0.0.0 se0/0
ip route 2.0.0.0 255.0.0.0 20.0.12.2

then I see traceroute to 2.2.2.2 is load balanced on both links

R1(config)#do tr 2.2.2.2

Type escape sequence to abort.
Tracing the route to 2.2.2.2

  1 20.0.12.2 164 msec
    10.0.12.2 140 msec *

but If I configure on R1 as below then traceroute to 2.2.2.2 follows serial
link only

ip route 2.0.0.0 255.0.0.0 10.0.12.2
ip route 2.0.0.0 255.0.0.0 e1/0

R1(config)#do tr 2.2.2.2

Type escape sequence to abort.
Tracing the route to 2.2.2.2

  1 10.0.12.2 196 msec *  140 msec

Could anyone please clear what is happening here ?

- -- 
TAQDIR SINGH
Network Engineering
(+91) 991.170.9496 | (+91) 801.041.5988


-----BEGIN PGP SIGNATURE-----
Version: PGP Desktop 9.12.0 (Build 1035)
Charset: us-ascii

wsBVAwUBS0yYb4MqcCx81E71AQjZqQf/fXzNKimmUO83PVS67lbYYa2ta/hlBi55
BfHdnhC+8TYNO1QNwEMHXMdIk07OxHsvic9uF23i8NAl/aFec8PXZvgdy5UeCsnW
6fgkqeYEM502a6gKvCI2FCermeTbpQkXHT9dMsKatoWjo7x8S5eauEmgADTZFecM
0+RCls8LF1JqeomeKcuS/ho970QnCeD1ay+rtcmqNjBSfa9oXxR5+KtpD0tcSxdy
n2oyS4Kzyk4OT8n3WV1x2l8GMLmPVqr1mLnOosvxRNviow6snWMjBxY6mRWnz+D2
TX6nj72nXQqiJzxn6XO1K3Gullo7KPBzKnTM6gVOhTnvA7NVK8Uppw==
=IGOh
-----END PGP SIGNATURE-----

I might be wrong but isn’t load balancing based on CEF which does the balancing on a hash of the Source/Destination IP, thereby it would follow only one of the routes each time as the source/destination IP hash does not change.

 

Bradley

 

From: [email protected] [mailto:[email protected]] On Behalf Of Taqdir Singh
Sent: 12 January 2010 15:32
To: [email protected]
Subject: [OSL | CCIE_RS] Static route Selection

 

Hi All,

I have one doubt in static route selection.
Please see my attached  network diagram.

Between R1 and R2, one is serial link and one is ethernet.

If I configure R1 as

ip route 2.0.0.0 255.0.0.0 se0/0
ip route 2.0.0.0 255.0.0.0 20.0.12.2

then I see traceroute to 2.2.2.2 is load balanced on both links

R1(config)#do tr 2.2.2.2

Type escape sequence to abort.
Tracing the route to 2.2.2.2

  1 20.0.12.2 164 msec
    10.0.12.2 140 msec *

but If I configure on R1 as below then traceroute to 2.2.2.2 follows serial link only

ip route 2.0.0.0 255.0.0.0 10.0.12.2
ip route 2.0.0.0 255.0.0.0 e1/0

R1(config)#do tr 2.2.2.2

Type escape sequence to abort.
Tracing the route to 2.2.2.2

  1 10.0.12.2 196 msec *  140 msec

Could anyone please clear what is happening here ?

--
TAQDIR SINGH
Network Engineering
(+91) 991.170.9496 | (+91) 801.041.5988

Attachment: PGPexch.htm.sig
Description: Binary data

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to