By latest material I have to insist -- This is BRAND new stuff as in the stuff that was just published to the student accounts this weekend. Please go to your student account and make sure you have the latest and greatest revision of the configuration files for volume 1 and let us know.
On Sat, Jan 30, 2010 at 1:10 PM, Marko Milivojevic <[email protected]>wrote: > On Sat, Jan 30, 2010 at 08:43, Ahmed Haji Munye <[email protected]>wrote: > >> >> >> If the interface is showing as not connected, then it cannot be more >> obvious tha that. No matter if you shutdown or enable it again. Because if >> the cable is not physically connected on that port, then it will never come >> up. >> >> Anyway taka a look on where that port goes to: >> >> *Cat3550-1*#sho running-config interface fastEthernet 0/2 >> Building configuration... >> Current configuration : 122 bytes >> ! >> interface FastEthernet0/2 >> *description goes to R2 port Fa1/0* >> switchport access vlan 12 >> switchport mode dynamic desirable >> end >> > > Hello Ahmed, > > Tyson's advice is by far the best. If you are having technical difficulties > that you think are the result of physical connectivity, please, get in touch > with our support. Please, have in mind that they probably can't help you > with the lab itself :-) > > Now, that being said, we are working on removing the use of NM-16ESW on R2 > from our labs. All our recently published labs should be without this > interface used. Are you using the latest revision of our material for your > practice? > > You can also always swap Fa0/2 with Gi0/2 (connected to R2's Gi0/0 SFP > port) and proceed with lab like that. > > * > > Just for my reference - what lab are you working on? > > -- > Marko Milivojevic - CCIE #18427 > Senior Technical Instructor - IPexpert > > Mailto: [email protected] > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > Community: http://www.ipexpert.com/communities > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Joe Astorino CCIE #24347 (R&S) Sr. Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
