Mustafa, How about this:
sho ip bgp vpnv4 all neighbors 4.4.4.4 advertised-routes Anything there? On Thu, Feb 11, 2010 at 12:57 PM, Mustafa Yadav <[email protected]>wrote: > hi gurus, > > > I have stucked in mpls.the problem is I want to see advertised routes > to antoher prefix. > > For the lab I performed CE got the routes from PEs.So I am pretty sure > everytginh is working.MBGP is working .but somehow I was unable to see > advertised routes.which command do I use to? > I used below did not worK.. > > > R3#sh bgp vpnv4 unicast vrf ca neighbors 4.4.4.4 advertised-routes > % No such neighbor or address family > > > > > > > R3#sh ip bg > R3#sh ip bgp vp > R3#sh ip bgp vpnv4 all su > R3#sh ip bgp vpnv4 all summary > BGP router identifier 3.3.3.3, local AS number 6500 > BGP table version is 13, main routing table version 13 > 9 network entries using 1260 bytes of memory > 9 path entries using 612 bytes of memory > 6/5 BGP path/bestpath attribute entries using 744 bytes of memory > 4 BGP extended community entries using 220 bytes of memory > 0 BGP route-map cache entries using 0 bytes of memory > 0 BGP filter-list cache entries using 0 bytes of memory > Bitfield cache entries: current 1 (at peak 1) using 32 bytes of memory > BGP using 2868 total bytes of memory > BGP activity 9/0 prefixes, 9/0 paths, scan interval 15 secs > > Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down > State/PfxRcd > 4.4.4.4 4 6500 16 14 13 0 0 00:08:30 > 3 > R3# > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Bryan Bartik CCIE #23707 (R&S, SP), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
