great..thanks
On 2/11/10, Bryan Bartik <[email protected]> wrote: > Mustafa, > > How about this: > > sho ip bgp vpnv4 all neighbors 4.4.4.4 advertised-routes > > Anything there? > > On Thu, Feb 11, 2010 at 12:57 PM, Mustafa Yadav > <[email protected]>wrote: > >> hi gurus, >> >> >> I have stucked in mpls.the problem is I want to see advertised routes >> to antoher prefix. >> >> For the lab I performed CE got the routes from PEs.So I am pretty sure >> everytginh is working.MBGP is working .but somehow I was unable to see >> advertised routes.which command do I use to? >> I used below did not worK.. >> >> >> R3#sh bgp vpnv4 unicast vrf ca neighbors 4.4.4.4 advertised-routes >> % No such neighbor or address family >> >> >> >> >> >> >> R3#sh ip bg >> R3#sh ip bgp vp >> R3#sh ip bgp vpnv4 all su >> R3#sh ip bgp vpnv4 all summary >> BGP router identifier 3.3.3.3, local AS number 6500 >> BGP table version is 13, main routing table version 13 >> 9 network entries using 1260 bytes of memory >> 9 path entries using 612 bytes of memory >> 6/5 BGP path/bestpath attribute entries using 744 bytes of memory >> 4 BGP extended community entries using 220 bytes of memory >> 0 BGP route-map cache entries using 0 bytes of memory >> 0 BGP filter-list cache entries using 0 bytes of memory >> Bitfield cache entries: current 1 (at peak 1) using 32 bytes of memory >> BGP using 2868 total bytes of memory >> BGP activity 9/0 prefixes, 9/0 paths, scan interval 15 secs >> >> Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down >> State/PfxRcd >> 4.4.4.4 4 6500 16 14 13 0 0 00:08:30 >> 3 >> R3# >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > > > -- > Bryan Bartik > CCIE #23707 (R&S, SP), CCNP > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
