Don't worry -- It is not an issue with your rack or even your logic. I am not quite sure what the original author was thinking but this just simply doesn't work. Not only will you have issues on VLAN 56 with a setup like this, but you will also have connectivity issues between R6 and R7 on VLAN 76. I would do the following to get around the problem and continue the lab despite the restrictions
1) Make Fa0/0.56 on R6 and configure it for VLAN 56 2) make Fa0/6 on Cat2 a dot1q trunk Have done with it...this task is a disaster. On Sun, Feb 28, 2010 at 11:39 PM, Rob Simmons <[email protected]> wrote: > Yes, 0/0.76. It's a Proctor Rack. As I said the thing that really stumped > me was I cleared the rack and loaded the final configs and the issue was > still there. > > Sent from my iPhone > > On Feb 28, 2010, at 11:02 PM, Joe Astorino <[email protected]> wrote: > > You mean Fa0/0.76 right? Is this a ProctorLabs rack? > > On Sun, Feb 28, 2010 at 10:51 PM, Rob Simmons < <[email protected]> > [email protected]> wrote: > >> Joe, yes both interfaces (fas0/1.76 as well) are in an up state but I'm >> unable to ping and/or establish an OSPF adjacency. If I remove the voice >> vlan from the switch the .56 segment re-establishes connectivity. >> >> Sent from my iPhone >> >> On Feb 28, 2010, at 10:37 PM, Joe Astorino < <[email protected]> >> [email protected]> wrote: >> >> There is nothing really in the configuration that would cause a problem >> like this. It is a pretty straight forward configuration. Can you be a >> little more specific? You lose all reachability to R6 Fa0/0 ??? If you >> leave the command "switchport voice vlan 76" off does it function properly? >> >> >> >> On Sun, Feb 28, 2010 at 9:30 PM, Rob Simmons < >> <[email protected]><[email protected]> >> [email protected]> wrote: >> >>> Sorry shouldve been more specific. This is Lab 9 from Volume 2 >>> >>> Sent from my iPhone >>> >>> On Feb 28, 2010, at 8:32 PM, Rob Simmons < >>> <[email protected]><[email protected]> >>> [email protected]> wrote: >>> >>> > I'm having issues with adding the voice Vlan to Fa0/6. Anytime I add >>> > this vlan to this port I loose connectivity on all traffic on the R6 >>> > port. I've even reloaded my rack with the final configs and have >>> > seen the same behavior. Any help on this item? >>> > >>> > Sent from my iPhone >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit <http://www.ipexpert.com> <http://www.ipexpert.com> >>> www.ipexpert.com >>> >> >> >> >> -- >> Regards, >> >> Joe Astorino CCIE #24347 (R&S) >> Sr. Technical Instructor - IPexpert >> Mailto: <[email protected]> <[email protected]> >> [email protected] >> Telephone: +1.810.326.1444 >> Live Assistance, Please visit: >> <http://www.ipexpert.com/chat><http://www.ipexpert.com/chat> >> www.ipexpert.com/chat >> eFax: +1.810.454.0130 >> >> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA >> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & >> Service Provider) Certification Training with locations throughout the >> United States, Europe and Australia. Be sure to check out our online >> communities at >> <http://www.ipexpert.com/communities><http://www.ipexpert.com/communities> >> www.ipexpert.com/communities and our public website at >> <http://www.ipexpert.com> <http://www.ipexpert.com>www.ipexpert.com >> >> >> > > > -- > Regards, > > Joe Astorino CCIE #24347 (R&S) > Sr. Technical Instructor - IPexpert > Mailto: <[email protected]>[email protected] > Telephone: +1.810.326.1444 > Live Assistance, Please visit: <http://www.ipexpert.com/chat> > www.ipexpert.com/chat > eFax: +1.810.454.0130 > > IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, > Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service > Provider) Certification Training with locations throughout the United > States, Europe and Australia. Be sure to check out our online communities at > <http://www.ipexpert.com/communities>www.ipexpert.com/communities and our > public website at <http://www.ipexpert.com>www.ipexpert.com > > > -- Regards, Joe Astorino CCIE #24347 (R&S) Sr. Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
