Hi all, I have question about Vol2 Lab4 on task 8.2
Why use : access-list xx permit tcp any eq 80 any access-list xx permit tcp any any eq 80 priority-list 1 protocol ip high list xx rather priority-list 1 protocol ip high tcp www Thanks. ################################################################################ This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify Simac PSF S.A. immediately and then delete this e-mail. Simac PSF S.A. has taken all reasonable precautions to avoid virusses in this email. Simac PSF S.A does not accept liability for damage by virusses, for the correct and complete transmission of the information, nor for any delay or interruption of the transmission, nor for damages arising from the use of or reliance on the information. All e-mail messages addressed to, received or sent by Simac PSF S.A. or Simac PSF S.A. employees are deemed to be professional in nature. Accordingly, the sender or recipient of these messages agrees that they may be read by other Simac PSF S.A. employees than the official recipient or sender in order to ensure the continuity of work-related activities and allow supervision thereof. ###############################################################################
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
