Here is part of the task info:
.
.
.
On R9, configure three loopback interfaces with the subnets of:
140.10.8.0
140.10.10.0
140.10.11.0
Configure R9 so it will send one route to cover those networks and the
network attached to its Ethernet interface.
Do not use distribute-filters or summary-address for this step.
.
.
.
However, the DSG lists this as the solution for the summary requirement:
"In order to configure R9 to not receive queries, configure as a stub
area. Configure the summary for the four networks on the interface connecting to
R6."
.
.
.
R9(config) # int multi1
R9(config-if) # ip summary-address eigrp 1 140.10.8.0 255.255.252.0
.
.
.
Is there something going on with using stub in this task that makes this use of
the ip summary-address statement "not count"?
Derek Mills
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anheuser-Busch InBev Email Disclaimer www.ab-inbev.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
