Hello IPExperts-- just following up on this. Let me know if I need to state something differently or if I need to include more information.
________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Mills, Derek Sent: Tuesday, April 13, 2010 7:40 AM To: CCIE OSL Subject: [OSL | CCIE_RS] Workbook 2, lab 9, task 3.1 Here is part of the task info: . . . On R9, configure three loopback interfaces with the subnets of: 140.10.8.0 140.10.10.0 140.10.11.0 Configure R9 so it will send one route to cover those networks and the network attached to its Ethernet interface. Do not use distribute-filters or summary-address for this step. . . . However, the DSG lists this as the solution for the summary requirement: "In order to configure R9 to not receive queries, configure as a stub area. Configure the summary for the four networks on the interface connecting to R6." . . . R9(config) # int multi1 R9(config-if) # ip summary-address eigrp 1 140.10.8.0 255.255.252.0 . . . Is there something going on with using stub in this task that makes this use of the ip summary-address statement "not count"? Derek Mills ________________________________ Anheuser-Busch InBev Email Disclaimer www.ab-inbev.com <http://www.ab-inbev.com/disclaimer.cfm>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
