Correct, the virtual template interfaces aren't expected to come up, but the virtual access is. I followed the dsg exactly, so I guess I need to look at the final configs to see what I missed unless someone has had the same issue.
Regards, Jay McMickle- CCNP, CCSP, MCSE Sent from my iPhone On Jul 21, 2010, at 12:45 AM, Markku Leiniö <[email protected]> wrote: > Hi! As far as I know, *virtual-template* interfaces never come up as > they are just used as templates. What is the situation with the > *virtual-access* interface(s) that are created automatically? > > Markku > > On Wed, Jul 21, 2010 at 5:18 AM, Jay McMickle <[email protected]> wrote: >> Has anyone run across issues with the Virtual templates not coming up with >> the PPP over Frame-Relay? I tried it my way, looked at the DSG, reloaded my >> routers, and put in the DSG commands line by line. I'm using the physical >> interface (not sub-interfaces) for the frame-relay interface-dlci x1x ppp >> virtual-template1 after the VT's are created. Again, I followed it step by >> step, using the physical interfaces of the 150.100.24.x and 150.100.100.x >> interfaces. I know the lab isn't wrong, so I'm wondering if there is a >> catch in a previous step that I missed that is a pre-requisite for this >> task. >> >> Anyone recently looked at this and had the same issues? I've reloaded by >> routers back to task 6.8. >> >> >> >> >> Regards, >> Jay McMickle- CCNP, CCSP, MCSE >> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
