Abel, Would you provide an example of this route-map configuration, because i do not understand this concept with RIP to change next-hop...
Thanks.. Garry.. -- Garry L. Baker "There is no 'patch' for stupidity." - www.sqlsecurity.com On Thu, Aug 12, 2010 at 6:48 PM, Abel ... <[email protected]> wrote: > Too change the next hop use a route map either Cat4 or R8 changing it, Cat4 > would re-route the traffic. > > On Thu, Aug 12, 2010 at 2:19 AM, m.lammerse <[email protected]> wrote: > >> This won't change the next hop ip address inside the rip updates though. A >> show ip route won't show cat4 as the next-hop for routes advertised from >> bb3. >> >> On 12 Aug, 2010,at 03:53 PM, Samir Idris <[email protected]> wrote: >> >> Marc, >> >> Simply make this BB3 interface passive. Use the neighbor command to peer >> with Cat4 interface and off you go. Cat4 will get the route from BB3 and >> because of the peering between Cat4 and R8, it will get BB3 route from >> Cat4. Sorry for using the word peering in case of RIP. >> >> I hope this helps. >> >> Regards, >> Samir. >> >> On Thu, Aug 12, 2010 at 11:28 AM, <[email protected]>wrote: >> >>> Send CCIE_RS mailing list submissions to >>> [email protected] >>> >>> To subscribe or unsubscribe via the World Wide Web, visit >>> >>> http://onlinestudylistcom/mailman/listinfo/ccie_rs<http://onlinestudylist.com/mailman/listinfo/ccie_rs> >>> >>> or, via email, send a message with subject or body 'help' to >>> [email protected] >>> >>> You can reach the person managing the list at >>> [email protected] >>> >>> When replying, please edit your Subject line so it is more specific >>> than "Re: Contents of CCIE_RS digest..." >>> >>> >>> Today's Topics: >>> >>> 1. Rip distance problem (marc abel) >>> >>> >>> ---------------------------------------------------------------------- >>> >>> Message: 1 >>> Date: Wed, 11 Aug 2010 20:28:26 -0500 >>> From: marc abel <[email protected]> >>> To: [email protected] >>> Subject: [OSL | CCIE_RS] Rip distance problem >>> Message-ID: >>> <[email protected]> >>> Content-Type: text/plain; charset="iso-8859-1" >>> >>> I have 3 routers/switches participating in rip as in the diagram >>> attached. >>> The goal is to make R8 see the routes advertised by bb3 as if they are >>> from >>> Cat4. I have disabled split horizon on the CAT4 vlan50 interface. >>> >>> Here is my R8 config >>> >>> router rip >>> version 2 >>> redistribute ospf 1 metric 10 >>> passive-interface default >>> no passive-interface FastEthernet0/0 >>> network 110.0.0.0 >>> distance 255 >>> distance 121 110.99.200.22 0.0.0.0 >>> distance 111 110.99.200.40 0.0.0.0 >>> no auto-summary >>> >>> but when I do a show ip ro rip >>> >>> R8(config-router)#do show ip ro rip >>> 110.0.0.0/8 is variably subnetted, 12 subnets, 4 masks >>> R 110.99.104.104/32 [111/1] via 110.99.200.40, 00:00:10, >>> FastEthernet0/0 >>> 192.168.2.0/32 is subnetted, 4 subnets >>> R 192.168.2.2 [111/2] via 110.99.20022, 00:00:10, FastEthernet0/0 >>> >>> R 192.168.2.3 [111/2] via 110.99.200.22, 00:00:10, FastEthernet0/0 >>> R 192.168.2.1 [111/2] via 110.99.200.22, 00:00:10, FastEthernet0/0 >>> R 192.168.2.4 [111/2] via 110.99.200.22, 00:00:10, FastEthernet0/0 >>> >>> What am I missing? >>> >>> Thank you, >>> >>> Marc >>> -------------- next part -------------- >>> An HTML attachment was scrubbed... >>> URL: </archives/ccie_rs/attachments/20100811/4c25f59f/attachment.html> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: problem.png >>> Type: image/png >>> Size: 38829 bytes >>> Desc: not available >>> URL: </archives/ccie_rs/attachments/20100811/4c25f59f/attachment.png> >>> >>> End of CCIE_RS Digest, Vol 55, Issue 31 >>> *************************************** >>> >> >> >> >> -- >> Samir Idris >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpertcom <http://www.ipexpert.com> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
