Thoughts?
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Maynard Sent: August-22-10 7:04 AM To: 'Rogelio Gamino' Cc: [email protected] Subject: Re: [OSL | CCIE_RS] VOL3-LAB7- PPPOE and VRF Yes, but it will not allow you to use the "host" command once you add it to the vrf From: Rogelio Gamino [mailto:[email protected]] Sent: August-22-10 1:25 AM To: Jason Maynard Cc: [email protected] Subject: Re: [OSL | CCIE_RS] VOL3-LAB7- PPPOE and VRF Have you tried adding the VRF info to the dhcp pool PPPOE? On Aug 21, 2010, at 11:05 PM, Jason Maynard wrote: I cannot get the PPPOE client to obtain the correct IP address from the dhcp server after applying the VRF. Thoughts? R8 __ interface FastEthernet0/1 no ip address duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 interface Dialer1 mtu 1492 ip address dhcp client-id FastEthernet0/1 encapsulation ppp dialer pool 1 ppp ipcp mask request show inter fas 0/1 FastEthernet0/1 is up, line protocol is up Hardware is MV96340 Ethernet, address is 0012.8031.d209 (bia 0012.8031.d209) R4 __ ip vrf R8 rd 45:8 route-target export 45:8 route-target import 45:8 route-target import 12:13 ip dhcp excluded-address 10.8.45.4 ip dhcp pool ALL vrf R8 network 10.8.45.0 255.255.255.0 ! ip dhcp pool PPPOE host 10.8.45.8 255.255.255.0 client-identifier 0100.1280.31d2.09 bba-group pppoe global virtual-template 2 interface FastEthernet0/1.48 encapsulation dot1Q 48 pppoe enable group global interface Virtual-Template2 mtu 1492 ip vrf forwarding R8 ip address 10.8.45.4 255.255.255.0 peer default ip address dhcp-pool PPPOE ALL ppp ipcp mask 255.255.255.0 ppp ipcp address required debug ip dhcp server packet *Aug 21 21:59:18.323: DHCPD: Allocate an address without class information (10.8.45.0) R4# *Aug 21 21:59:20.323: DHCPD: Allocate an address without class information (10.8.45.0) R4# *Aug 21 21:59:30.939: DHCPD: DHCPDISCOVER received from client 0100.1280.31d2.09 on interface Virtual-Access2.1. *Aug 21 21:59:30.943: DHCPD: Allocate an address without class information (10.8.45.0) R4# *Aug 21 21:59:32.943: DHCPD: Sending DHCPOFFER to client 0100.1280.31d2.09 (10.8.45.10). *Aug 21 21:59:32.943: DHCPD: broadcasting BOOTREPLY to client 0012.8031.d209. *Aug 21 21:59:32.943: DHCPD: DHCPREQUEST received from client 0100.1280.31d2.09. *Aug 21 21:59:32.947: DHCPD: No default domain to append - abort update *Aug 21 21:59:32.947: DHCPD: Sending DHCPACK to client 0100.1280.31d2.09 (10.8.45.10). *Aug 21 21:59:32.947: DHCPD: broadcasting BOOTREPLY to client 0012.8031.d209. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
