Jason, Have you tried the solution from the DSG?
-- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Mon, Aug 23, 2010 at 11:51, Jason Maynard <[email protected]> wrote: > Thoughts? > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Jason Maynard > Sent: August-22-10 7:04 AM > To: 'Rogelio Gamino' > > Cc: [email protected] > Subject: Re: [OSL | CCIE_RS] VOL3-LAB7- PPPOE and VRF > > > > Yes, but it will not allow you to use the “host” command once you add it to > the vrf > > > > > > > > From: Rogelio Gamino [mailto:[email protected]] > Sent: August-22-10 1:25 AM > To: Jason Maynard > Cc: [email protected] > Subject: Re: [OSL | CCIE_RS] VOL3-LAB7- PPPOE and VRF > > > > Have you tried adding the VRF info to the dhcp pool PPPOE? > > > > > > > > On Aug 21, 2010, at 11:05 PM, Jason Maynard wrote: > > > > I cannot get the PPPOE client to obtain the correct IP address from the dhcp > server after applying the VRF. > > > > Thoughts? > > > > R8 > > __ > > > > interface FastEthernet0/1 > > no ip address > > duplex auto > > speed auto > > pppoe enable group global > > pppoe-client dial-pool-number 1 > > > > > > interface Dialer1 > > mtu 1492 > > ip address dhcp client-id FastEthernet0/1 > > encapsulation ppp > > dialer pool 1 > > ppp ipcp mask request > > > > > > > > show inter fas 0/1 > > FastEthernet0/1 is up, line protocol is up > > Hardware is MV96340 Ethernet, address is 0012.8031.d209 (bia > 0012.8031.d209) > > > > R4 > > __ > > > > ip vrf R8 > > rd 45:8 > > route-target export 45:8 > > route-target import 45:8 > > route-target import 12:13 > > > > ip dhcp excluded-address 10.8.45.4 > > > > ip dhcp pool ALL > > vrf R8 > > network 10.8.45.0 255.255.255.0 > > ! > > ip dhcp pool PPPOE > > host 10.8.45.8 255.255.255.0 > > client-identifier 0100.1280.31d2.09 > > > > bba-group pppoe global > > virtual-template 2 > > > > interface FastEthernet0/1.48 > > encapsulation dot1Q 48 > > pppoe enable group global > > > > interface Virtual-Template2 > > mtu 1492 > > ip vrf forwarding R8 > > ip address 10.8.45.4 255.255.255.0 > > peer default ip address dhcp-pool PPPOE ALL > > ppp ipcp mask 255.255.255.0 > > ppp ipcp address required > > > > > > > > debug ip dhcp server packet > > > > *Aug 21 21:59:18.323: DHCPD: Allocate an address without class information > (10.8.45.0) > > R4# > > *Aug 21 21:59:20.323: DHCPD: Allocate an address without class information > (10.8.45.0) > > R4# > > *Aug 21 21:59:30.939: DHCPD: DHCPDISCOVER received from client > 0100.1280.31d2.09 on interface Virtual-Access2.1. > > *Aug 21 21:59:30.943: DHCPD: Allocate an address without class information > (10.8.45.0) > > R4# > > *Aug 21 21:59:32.943: DHCPD: Sending DHCPOFFER to client 0100.1280.31d2.09 > (10.8.45.10). > > *Aug 21 21:59:32.943: DHCPD: broadcasting BOOTREPLY to client > 0012.8031.d209. > > *Aug 21 21:59:32.943: DHCPD: DHCPREQUEST received from client > 0100.1280.31d2.09. > > *Aug 21 21:59:32.947: DHCPD: No default domain to append - abort update > > *Aug 21 21:59:32.947: DHCPD: Sending DHCPACK to client 0100.1280.31d2.09 > (10.8.45.10). > > *Aug 21 21:59:32.947: DHCPD: broadcasting BOOTREPLY to client > 0012.8031.d209. > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
