Does ir show that you are stuck in EXSTART?
Sent from my T-Mobile myTouch 3G Slide
----- Reply message -----
From: "Amer Mustafa" <[email protected]>
Date: Wed, Aug 25, 2010 4:48 pm
Subject: [OSL | CCIE_RS] Workbook 1 LAB 10 Task : 10.14
To: "Matt Hill" <[email protected]>
Cc: "[email protected]" <[email protected]>
i have set the IP OSPF MTU-IGNORE on CAT1, R8 and also CAT2 since CAT1 is
connecting R8 via CAT2. but still the same,
i enabled the debug ip ospf events and debug ip ospf adj, but couldnt see
anything noticeable.
regards ...
amer
On Thu, Aug 26, 2010 at 2:34 AM, Matt Hill
<[email protected]<mailto:[email protected]>> wrote:
Hi Amer,
What errors are you receiving? What do the debugs show?
Do you have OSPF to ignore MTU on both devices?
Cheers,
Matt
CCIE #22386
CCSI #31207
On 26 August 2010 09:27, Amer Mustafa
<[email protected]<mailto:[email protected]>> wrote:
> Hello,
>
> there is a wierd behavior in the task 10.14. in WS 1 LAB 10.
>
> the CAT1 is not able to create a neighborship with R8, i have checked all
> the possiabilities but no luck, changed the MTUs, used the MTU ignore but
> still its same, no result when giving command , show ip ospf nei.
>
> my pod was 123, can you tell me the reason for this ?
>
> thanks
> Amer
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com<http://www.ipexpert.com/>
>
>
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
