The 3500Xl is a layer2 only switch; you will need 3550 with IP base code at a
bare minimum. Also Cisco has removed the 3550 from the actual lab exam and
replaced it with four 3560's. If you can afford it go with some 24 port 3560's,
otherwise you can still do a good portion using 3550's.
Thank you,
Steve Di Bias
Network Engineer - Information Systems
Valley Health System - Las Vegas
Office - 702- 369-7594
Cell - 702-241-1801
[email protected]<mailto:[email protected]>
________________________________
From: [email protected]
[mailto:[email protected]] On Behalf Of Malik Nouman Ahmad
Sent: Monday, August 30, 2010 1:36 PM
To: ccie_rs
Subject: [OSL | CCIE_RS] 3500 XL Switch for CCIE R&S
Dear All,
Can Cisco 3500 XL switch be used instead of Cisco 3550 switch for CCIE RS lab?
Please advice
--
Malik Nouman Ahmad
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
