Hello,
I'm unable to get this p-t-p frame connection working.
I can not seem to assign the dlci to the sub-interface on r2.
Any ideas. This should be pretty straight forward.
Thanks in advance,
Terry
R2(config)#int s0/1/0.24
R2(config-subif)#frame-relay interface-dlci 204
%PVC already assigned to interface Serial0/1/0
R2(config-subif)#do sh frame pvc
PVC Statistics for interface Serial0/1/0 (Frame Relay DTE)
Active Inactive Deleted Static
Local 0 0 0 0
Switched 0 0 0 0
Unused 4 8 0 0
DLCI = 204, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/1/0
input pkts 24 output pkts 0 in bytes 816
out bytes 0 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:24:28, last time pvc status changed 00:24:28
--More--
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
