Thanks Michael, I'm sorry I missed the vlecture. I'll try that then.
In the interim, I used the R2 s0/1/0 interface and it worked. Best Regards, Terry Terry L. Zacharias CISSP DeCA-CITCN NetComm (SFP Group) Network Sustainment Fort Lee, Virginia Tel: 804 734-8000 ext. 48957 DSN: 687-8000 ext. 48957 email: [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Miller Sent: Wednesday, September 15, 2010 2:13 PM To: [email protected] Subject: Re: [OSL | CCIE_RS] Lab 1 Volume 1 Version 4 Workbook Frame-relay xtion from r2 to r4 Marko did a great vLecture on this exact subject a few days ago. He covers this problem in detail, and the best way to avoid it is to shut the physical interface that is running inarp before configuring the subinterface. Thanks, Michael On Wed, Sep 15, 2010 at 8:10 PM, Rogelio Gamino <[email protected]> wrote: Disable inverse arp as well. On Sep 15, 2010, at 2:07 PM, Tyson Scott wrote: shutdown the primary then assign. Then unshut. Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: [email protected] Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com <http://www.ipexpert.com/> From: [email protected] [mailto:[email protected]] On Behalf Of Zacharias, Terry L CIV (USA) DeCA HQ CI Sent: Wednesday, September 15, 2010 1:58 PM To: [email protected] Subject: [OSL | CCIE_RS] Lab 1 Volume 1 Version 4 Workbook Frame-relay xtion from r2 to r4 Hello, I'm unable to get this p-t-p frame connection working. I can not seem to assign the dlci to the sub-interface on r2. Any ideas. This should be pretty straight forward. Thanks in advance, Terry R2(config)#int s0/1/0.24 R2(config-subif)#frame-relay interface-dlci 204 %PVC already assigned to interface Serial0/1/0 R2(config-subif)#do sh frame pvc PVC Statistics for interface Serial0/1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 0 0 0 0 Switched 0 0 0 0 Unused 4 8 0 0 DLCI = 204, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/1/0 input pkts 24 output pkts 0 in bytes 816 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 00:24:28, last time pvc status changed 00:24:28 --More-- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com <http://www.ipexpert.com/> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com <http://www.ipexpert.com/> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
