Hi jason, I don't have access to the work book right now, but I would
suggest there is something omiss with your o-e route map... Please
correct if I'm wrong!
You start by denying tag 90, good, no eigrp going in to eigrp.
You then match ospf tag, and reset ospf tag? Liitle unsure on this,
wouldn't expect you to have ospf routes already tag as ospf routes
within ospf, but can see is possible. Usually expect this as a catch
all last entry with out the match command. Expect you may have two
ospf islands for example..
You then pass through rip, all fine.
But you then at the bottom of your route map, match everything else
known in ospf, and tag it as eigrp?? I would expect this to be where
you set tag 110...
Same concern on your e-o route map
Sent from my iPhone
On 23 Sep 2010, at 15:20, Jason Maynard <[email protected]>
wrote:
Nothing shows on any device (debug ip routing is running)
I really appreciate your feedback as to whether the approach is
good and whether or not I should of done things differently.
Thanks
Jason Maynard
From: Marko Milivojevic <[email protected]>
To: Jason Maynard <[email protected]>
Cc: Jason Maynard <[email protected]>; "<[email protected]
>" <[email protected]>
Sent: Thu, September 23, 2010 9:31:48 AM
Subject: Re: [OSL | CCIE_RS] VOL3-LAB5 - Ticket6
I'm in the class just now. I will have to read through the lab and
your solution to see.
Are there any loops in the network? If not, your solution must be OK.
--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
Free CCIE Training: http://bit.ly/vLecture
Mailto: [email protected]
Telephone: +1.810.326.1444
Community: http://www.ipexpert.com/communities
:: Sent from my phone. Apologies for errors and brevity. ::
On Sep 23, 2010, at 12:15, "Jason Maynard"
<[email protected]> wrote:
Hey guys I can really use some feedback
Marko and/or Tyson can you please provide some feedback?
Thanks!!
From: [email protected] [mailto:ccie_rs-
[email protected]] On Behalf Of Jason Maynard
Sent: September-22-10 9:27 PM
To: [email protected]
Subject: [OSL | CCIE_RS] VOL3-LAB5 - Ticket6
Hey guys can you confirm whether my route-map works and ensures not
loops could form. The DSG has allot less configuration but I know
Marko has mentioned in his lectures that tags just ensure that
loops cannot for even if routing protocols have mechanisms to
prevent them. (Marko, I hope I have this right and if not I am sure
you will correct me :P )
Redistribution and ensure that there is no LOOPs
R4
__
Protocols EIGRP and OSPF
route-map O-E deny 10
match tag 90
!
route-map O-E permit 20
match tag 110
set tag 110
!
route-map O-E permit 25
match tag 120
set tag 120
!
route-map O-E permit 30
set tag 90
!
route-map E-O deny 10
match tag 110
!
route-map E-O permit 20
match tag 90
set tag 90
!
route-map E-O permit 25
match tag 120
set tag 120
!
route-map E-O permit 30
set tag 110
R7
__
Protocols EIGRP and OSPF and RIP
route-map O-E deny 10
match tag 90
!
route-map O-E permit 20
match tag 110
set tag 110
!
route-map O-E permit 25
match tag 120
set tag 120
!
route-map O-E permit 30
set tag 90
!
route-map E-O deny 10
match tag 110
!
route-map E-O permit 20
match tag 90
set tag 90
!
route-map E-O permit 25
match tag 120
set tag 120
!
route-map E-O permit 30
set tag 110
!
route-map R-O deny 10
match tag 110
!
route-map R-O permit 20
match tag 120
set tag 120
!
route-map R-O permit 25
match tag 90
set tag 90
!
route-map R-O permit 30
set tag 120
!
route-map O-R deny 10
match tag 120
!
route-map O-R permit 20
match tag 110
set tag 110
!
route-map O-R permit 25
match tag 90
set tag 90
!
route-map O-R permit 30
set tag 120
!
route-map E-R deny 10
match tag 120
!
route-map E-R permit 20
match tag 90
set tag 90
!
route-map E-R permit 25
match tag 110
set tag 110
!
route-map E-R permit 30
set tag 120
!
route-map R-E deny 10
match tag 90
!
route-map R-E permit 20
match tag 120
set tag 120
!
route-map R-E permit 25
match tag 110
set tag 110
!
route-map R-E permit 30
set tag 90
R9
__
Protocols EIGRP and RIP
route-map E-R deny 10
match tag 120
!
route-map E-R permit 20
match tag 90
set tag 90
!
route-map E-R permit 25
match tag 110
set tag 110
!
route-map E-R permit 30
set tag 120
!
route-map R-E deny 10
match tag 90
!
route-map R-E permit 20
match tag 120
set tag 120
!
route-map R-E permit 25
match tag 110
set tag 110
!
route-map R-E permit 30
set tag 90
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
