There is no difference, it really just a matter of preference. However in the
actual exam it may come down to speed. If you are using notepad to copy/paste
using the 150.100.24.0 0.0.0.255 is faster but it's really up to you.
HTH
Thank you,
Steve Di Bias
Network Engineer - Information Systems
Valley Health System - Las Vegas
Office - 702- 369-7594
Cell - 702-241-1801
[email protected]<mailto:[email protected]>
________________________________
From: [email protected]
[mailto:[email protected]] On Behalf Of Amer Mustafa
Sent: Wednesday, October 13, 2010 2:35 PM
To: [email protected]
Subject: [OSL | CCIE_RS] Network Advertisements.
Example :
R1 S0/0/0 : IP address is 150.100.24.2 / 24
R2 S0/0/0 : IP address is 150.100.24.4 / 24
lets say we want to enable OSPF on this segment, so would it make any
difference if we type on R1 :
router ospf
network 150.100.24.2 0.0.0.0 area 0
OR
router ospf
network 150.100.24.0 0.0.0.255 area 0
Becuase i have seen both during configurations , is there any recommendations
which syntax we should use and why ? and can i always make it 0.0.0.0 with
exact IP except in the LAN environments ?
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
