Section 2.4 Configure any interfaces connecting the switches together to appear as one link to STP per neighbor. If either of the interfaces is damaged, the switches should manage one-way links. Do not use industry standards, but make sure these links can negotiate their setup.
The task states that one-way links should be "managed" but the solution guide states: "Finally, turn on UDLD to manage the one-way link detection. There's no mention about anything requiring aggressive mode, so that part is up to you." I guess my question is one regarding wording. The task states that the switches should "manage" one-way links. The prescribed solution seems only informational (at best) and would do nothing to prevent Bridging- Loops. Which I assume is what we are being asked to manage. Additionally, the task states that we can not use an industry standard, but we must make sure these links can "negotiate their setup". But the solution on page 43 states that we "end up either using PAgP or just mode on" I thought that mode "on" didn't allow negotiation, am I incorrect? Any help/thoughts would be appreciated. Terry _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
