Hi,
I have load initial configuration on R2 and R5 . Serial 0/2/0 interface on
R2 showing standby mode and line protocol is down
On R5 it is showing down/down
Configuration on R5:
R5#sh run int se0/2/0
Building configuration...
Current configuration : 102 bytes
!
interface Serial0/2/0
bandwidth 128
ip address 150.100.25.5 255.255.255.0
encapsulation ppp
end
R5#sh int se0/2/0
Serial0/2/0 is down, line protocol is down
Hardware is GT96K Serial
Internet address is 150.100.25.5/24
MTU 1500 bytes, BW 128 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Closed, loopback not set
Keepalive set (10 sec)
CRC checking enabled
Last input 00:15:54, output 00:15:54, output hang never
Last clearing of "show interface" counters 01:00:48
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 96 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
61 packets input, 2900 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
79 packets output, 3370 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
14 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
22 carrier transitions
DCD=down DSR=down DTR=up RTS=up CTS=down
R5#
-----------------
on R2:
interface Serial0/2/0
description Serial Link to R5
bandwidth 128
ip address 150.100.25.2 255.255.255.0
encapsulation ppp
clock rate 128000
Is this part of troubleshooting of this lab.? Has anyone experience this
before.? Please let me know.
BTW : I reload initial configuration twice on R2 and R5 still interface
shows down/down
Thanks & Regards,
Ram
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
