To shape all the traffic except the H323 Voice traffic destined to
> 200.0.0.4, The 2nd line of access-list should be
>
> 20 permit ip any any
>
> Following ports are defined in nbar port-map for H323
>
> R7(config-cmap)#do sh ip nbar port-map h323
> port-map h323 udp 1300 1718 1719 1720 11720
> port-map h323 tcp 1300 1718 1719 1720 11000 - 11999
>
> but ACL looks like
>
> 10 deny udp any host 200.0.0.4 range 16384 32767
>
> Subtask in the same task requires the same condition through the fa 0/0
> interface, but solution traffic shape all the traffic not only to
> destination 200.0.0.4
>
> How can we more specific without acl!
>
> On Mon, Oct 4, 2010 at 11:01 PM, Di Bias, Steve
> <[email protected]>wrote:
>
>> In this task it asks us to configure the bit rate of 7Mbps with no
>> excess burst; however there is nothing on burst itself. In my configs I only
>> specified the bit rate like this
>>
>>
>>
>> interface FastEthernet0/1
>>
>> traffic-shape group 101 7000000
>>
>>
>>
>> After looking at this I believe now that my answer is wrong because if I
>> look at the running-config for this interface I see the following
>>
>>
>>
>> interface FastEthernet0/1
>>
>> ip address 150.100.221.7 255.255.255.0
>>
>> traffic-shape group 101 7000000 175000 175000 1000
>>
>>
>>
>> The question said we should use no “excess burst” however looking at the
>> interface configuration I see an excess burst of 175000 which auto populated
>> itself.
>>
>>
>>
>> The DSG also states that the numbers are given to us; however the burst
>> size was never specified in the question. So my question is how does one
>> come up with this number? The DSG shows it as 875000, but does it matter
>> what we put here?
>>
>>
>>
>> Thanks in advance
>>
>>
>>
>> Steve
>>
>>
>>
>>
>>
>> UHS Confidentiality Notice: This e-mail message, including any
>> attachments, is for the sole use of the intended recipient(s) and may
>> contain confidential and privileged information. Any unauthorized review,
>> use, disclosure or distribution of this information is prohibited, and may
>> be punishable by law. If this was sent to you in error, please notify the
>> sender by reply e-mail and destroy all copies of the original message.
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
