BOTH. You should have initial configs in an INITIAL folder and final configs (for reviewing your work) in a FINAL folder. When you start a lab, you load your initial configs.
Yes, the dynamips file isn't spot on. You will have to tweak it a little to make it comply with your setup. --Hammer-- On Thu, Jan 27, 2011 at 2:51 PM, O'Brien, Neil <[email protected]> wrote: > Hi Hammer, > > > > I have the BLS and I have what I think is everything in my members area. I > have downloaded the configs and diagrams for Volume1. Within here are > folders for each Lab and inside these folders are INITIAL and FINAL > folders. Am I supposed to have configs in the INITIAL folder or just the > FINAL folder. And are these just base configs – I would have thought they’d > be in the INITIAL folder?? > > > > Also – there seems to be differences between the dynamips file downloaded > from the members area and the one that was made available in Tyson’s blog. > > > > I’m just a little confused as to which ones to be using. > > > > Sorry for the newb q’s, I just want to make sure I start off on the right > foot. > > > > Thanks, > > Neil > > > > > > > > Kind regards > > > > *Neil O'Brien* | Network Engineer > > TEL: 01 426 3500 | www.datapac.com > > > > [image: Description: Making life easier.gif] <http://www.datapac.com/> > > > > *Datapac, Your Integrated ICT Partner* > > Virtualisation & Cloud, Unified Communications & Networks, > > Managed Services, ERP, Accounting & EPOS Solutions, Print & Consumables. > > > > [image: Description: > cid:[email protected]]<http://www.linkedin.com/companies/datapac> > [image: Description: > cid:[email protected]]<http://www.twitter.com/datapac_ICT> > > > > *From:* Hammer [mailto:[email protected]] > *Sent:* 27 January 2011 16:43 > *To:* Angel Ramirez-Tejeda > *Cc:* O'Brien, Neil; [email protected] > *Subject:* Re: [OSL | CCIE_RS] BLS and GNS3 > > > > Neil, > > As Steve pointed out, you will have to do some manual editing of the > startup configs. If you prep your lab properly and build your .net file well > this is a minor inconvenience at the beginning of your lab. As for "where" > to get the initial configs, it should be in your account if you bought the > BLS. Someone from IPExpert might need to confirm that. Or you could ping > support if it's not there. > > > --Hammer-- > > On Thu, Jan 27, 2011 at 9:21 AM, Angel Ramirez-Tejeda < > [email protected]> wrote: > > Hi Neil, > > Please read Tyson's guide for the GNS3 configuration using IPEX's config > files: > > http://blog.ipexpert.com/2010/03/31/gns3-on-windows-7-the-ipexpert-way/ > > > > > On Thu, Jan 27, 2011 at 8:58 AM, O'Brien, Neil <[email protected]> > wrote: > > > Hi Guys, > > > > > > > > I have the BLS V4 package and I have also downloaded the "Dynamips > > support files" from the blog. I haven't really started using any of the > > labs from BLS, I'm just preparing. > > > > > > > > Am I supposed to have initial configs for the devices in the topology > > and if so where do I get them. I did download some configs from my > > members area but they don't seem to transfer directly over to the > > devices in the GNS3 support files. > > > > > > > > Am I missing something?? > > > > > > > > Thanks in advance, > > > > Neil > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
