> I got it already, i realized i need to use the clear frame-relay inarp (and > quickly apparently) before trying to set it on a new interface > > Alef > > but yes yours would probably work as well
Adam, thanks for that, i will try that out, those are some good tips. Yeah my luck with inverse arp varies as well, it seems to repopulate very quickly. Rgds, Alef > On 3 Mar 2011, at 09:02, Ananthan wrote: > >> >> Try this >> >> int ser0/1/0 >> shut >> no frame-relay interface-dlci 204 >> int Serial0/1/0.24 >> frame-relay interface-dlci 204 >> >> >> >> >> On Thu, Mar 3, 2011 at 3:14 PM, Alef <[email protected]> wrote: >> Hi, >> In Vol1, Lab1, page 25 i try to assign dlci 204 but it always gives up this >> command. Doing a show frame-relay pvc shows that it is indeed already in >> use. I have gone ahead and put no frame-relay inverse-arp on all FR >> interfaces (which does not show up in the config by the way), and reload all >> routers with FR interfaces (no easier way to clear pvc mappings?) but still >> i get this message. Anyone got any suggestions ? >> >> >> R2(config)#int Serial0/1/0.24 >> R2(config-subif)#frame-relay interface-dlci 204 >> %PVC already assigned to interface Serial0/1/0 >> >> Kind regards, >> Alef >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
