Or maybe you could create static summary address to Null 0, redistribute it into eigrp and run eigrp stub static under eigrp.
On Thu, Mar 17, 2011 at 9:33 AM, Ivan .:|:...:|:. <[email protected]>wrote: > Hi Nilesh, > > From my point of view you should just use default eigrp "auto summary" on > R9 and R6 will see just one summary route (140.10.0.0/16.) > I do not know if restriction not to use "summary-address"means just ip > summary-address eigrp or auto-summary as well :) > > Regs, > Ivan > > > > > On Thu, Mar 17, 2011 at 7:52 AM, Adam Booth <[email protected]> wrote: > >> Hi Nilesh, >> >> Maybe create the summary using a static route to null0, redistribute that >> into EIGRP and use an outbound offset list that will make the contributing >> routes to the summary so high that they appear to be infinite as far as >> the >> neighbors are concerned? >> >> Cheers, >> Adam >> >> On Thu, Mar 17, 2011 at 4:13 PM, Nilesh Mehta <[email protected]> wrote: >> >> > HI, >> > >> > I have router R6 and R9 connected through multilink ppp interface and >> EIGRP >> > is running between R6 and R9. >> > >> > I have following loop back int on R9. >> > >> > int lo 9 >> > ip add 140.10.8.9 255.255.255.0 >> > >> > int lo 10 >> > ip add 140.10.10.9 255.255.255.0 >> > >> > int lo 11 >> > ip add 140.10.11.9 255.255.255.0 >> > >> > Now requirement is that R6 should see only single route for this 3 loop >> > backs but We are not allowed to use any distribute-list or filter list >> or >> > summary-address command. >> > Can any one let me know how we can do this with out breaking >> restrictions? >> > what would be configuration on R9 ? >> > >> > Thanks >> > >> > Nilesh >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
