Christopher, You are running IP services. I believe you need advanced IP services IOS.
Corey On Wed, May 4, 2011 at 8:53 PM, Lemish, Christopher < [email protected]> wrote: > Guys, > > I ran "sdm prefer dual-ipv4-and-ipv6 def" on my Cat2/3 and reloaded. I did > this yet, I still can't issue the "ipv6 unicast-routing" on the switch. > > Cat2(config-ext-nacl)#do sh sdm prefer > The current template is "desktop IPv4 and IPv6 default" template. > The selected template optimizes the resources in > the switch to support this level of features for > 8 routed interfaces and 1024 VLANs. > number of unicast mac addresses: 2K > number of IPv4 IGMP groups + multicast routes: 1K > number of IPv4 unicast routes: 3K > number of directly-connected IPv4 hosts: 2K > number of indirect IPv4 routes: 1K > number of IPv6 multicast groups: 1.125k > number of directly-connected IPv6 addresses: 2K > number of indirect IPv6 unicast routes: 1K > number of IPv4 policy based routing aces: 0 > number of IPv4/MAC qos aces: 0.75K > number of IPv4/MAC security aces: 1K > number of IPv6 policy based routing aces: 0 > number of IPv6 qos aces: 0.5K > number of IPv6 security aces: 0.5K > > Cat2(config-ext-nacl)#do sh ver > Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version > 12.2(44)SE, RELEASE SOFTWARE (fc1) > Copyright (c) 1986-2008 by Cisco Systems, Inc. > Compiled Fri 04-Jan-08 21:02 by weiliu > Image text-base: 0x00003000, data-base: 0x01700000 > > Any thoughts? > > Theses are the only cmds I'm getting: > Cat2(config)#ipv6 ? > access-list Configure access lists > general-prefix Configure a general IPv6 prefix > hop-limit Configure hop count limit > host Configure static hostnames > icmp Configure ICMP parameters > local Specify local options > mld Global MLD Snooping enable for Catalyst Vlans > neighbor Neighbor > route Configure static routes > source-route Process packets with source routing header options > > > > > > This email and any files transmitted with it are confidential and are > intended for the sole use of the individual(s) to whom they are properly > addressed. Any use, dissemination or forwarding of this email and any > files transmitted with it by anyone other than the intended recipient(s) > is strictly prohibited. If you have received this email in error, please > notify the sender by replying to this email. Black Box Corporation and > its affiliates reserve the right to scan and monitor all e-mail traffic. > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
