Roger that and good luck on the CCIE lab!! Aaron Moreck <[email protected]> wrote:
I opted for the "transport ssh" only. I am on the home stretch for my lab attempt so i am trying to be as realisti as possible with my practice and not look at the DSG unitl after i am done. This forcing me to make a decision. Thanks for the input everyone. On Sat, Jun 11, 2011 at 1:51 PM, Di Bias, Steve <[email protected]<mailto:[email protected]>> wrote: Looking at the DSG they have removed telnet only allowing ssh so you were correct in your thinking "Di Bias, Steve" <[email protected]<mailto:[email protected]>> wrote: That's what I would do, or maybe ask the proctor as you suggested. So that begs a good question for which I don't have an answer. Which on is correct on the cats Line vty 0 4 Transport input telnet ssh Or Transport input ssh What does it show in the DSG? Aaron Moreck <[email protected]<mailto:[email protected]>> wrote: I am in the middle of Lab 17 and could use some clarification. Question 1.1 "Configure your VTY lines o all devices so they can be reached by telnet" Question 2.2 "Remote access sessions on both switches must be secured and encrypted" These seem like conflicting questions. I am assuming that i am to follow the more restrictive requirement and configure ssh only on CAT 1 and CAT 2 while allowing telnet to all other devices. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com/> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.platinumplacement.com/> UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
