Steve, According to the DocCD the rate must be a multiple of 8000 bits... Therefore the rate you configure is automatically rounded down to the closest multiple.
http://www.cisco.com/en/US/partner/docs/ios/qos/command/reference/qos_q1.html#wp1083294 Regards, Christophe On 19 Jun 2011, at 02:37, marc abel wrote: > I think it is the result of rounding when your TC and BC don't divide > evenly but I am not certain. > > On Sat, Jun 18, 2011 at 5:58 PM, Di Bias, Steve <[email protected]> > wrote: >> While configuring the rate-limit command I noticed that the numbers I put in >> were being changed to something else. For example, when I put in 1500000 it >> modifies it to 1496000. Can anyone tell me why this happens? >> >> >> inter fa0/0 >> rate-limit output 1500000 64000 64000 conform transmit exceed drop >> >> interface FastEthernet0/0 >> ip address 150.100.12.1 255.255.255.0 >> rate-limit output 1496000 64000 64000 conform-action transmit exceed-action >> drop >> priority-group 1 >> >> R1#show int fa0/0 rate-limit >> FastEthernet0/0 Link to R2 >> Output >> matches: all traffic >> params: 1496000 bps, 64000 limit, 64000 extended limit >> conformed 5 packets, 428 bytes; action: transmit >> exceeded 0 packets, 0 bytes; action: drop >> last packet: 1276ms ago, current burst: 0 bytes >> last cleared 00:00:39 ago, conformed 0 bps, exceeded 0 bps >> >> >> Thank you, >> Steve >> >> >> >> UHS Confidentiality Notice: This e-mail message, including any attachments, >> is for the sole use of the intended recipient (s) and may contain >> confidential and privileged information. Any unauthorized review, use, >> disclosure or distribution of this information is prohibited. If this was >> sent to you in error, please notify the sender by reply e-mail and destroy >> all copies of the original message. >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
