Awesome, thanks guys!! Christophe Lemaire <[email protected]> wrote:
Steve, According to the DocCD the rate must be a multiple of 8000 bits... Therefore the rate you configure is automatically rounded down to the closest multiple. http://www.cisco.com/en/US/partner/docs/ios/qos/command/reference/qos_q1.html#wp1083294 Regards, Christophe On 19 Jun 2011, at 02:37, marc abel wrote: > I think it is the result of rounding when your TC and BC don't divide > evenly but I am not certain. > > On Sat, Jun 18, 2011 at 5:58 PM, Di Bias, Steve <[email protected]> > wrote: >> While configuring the rate-limit command I noticed that the numbers I put in >> were being changed to something else. For example, when I put in 1500000 it >> modifies it to 1496000. Can anyone tell me why this happens? >> >> >> inter fa0/0 >> rate-limit output 1500000 64000 64000 conform transmit exceed drop >> >> interface FastEthernet0/0 >> ip address 150.100.12.1 255.255.255.0 >> rate-limit output 1496000 64000 64000 conform-action transmit exceed-action >> drop >> priority-group 1 >> >> R1#show int fa0/0 rate-limit >> FastEthernet0/0 Link to R2 >> Output >> matches: all traffic >> params: 1496000 bps, 64000 limit, 64000 extended limit >> conformed 5 packets, 428 bytes; action: transmit >> exceeded 0 packets, 0 bytes; action: drop >> last packet: 1276ms ago, current burst: 0 bytes >> last cleared 00:00:39 ago, conformed 0 bps, exceeded 0 bps >> >> >> Thank you, >> Steve >> >> >> >> UHS Confidentiality Notice: This e-mail message, including any attachments, >> is for the sole use of the intended recipient (s) and may contain >> confidential and privileged information. Any unauthorized review, use, >> disclosure or distribution of this information is prohibited. If this was >> sent to you in error, please notify the sender by reply e-mail and destroy >> all copies of the original message. >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
