Hey Alef, As long as you put a "0" in there is stays that way, however the DSG left it to IOS to insert these values. My argument is that the DSG's answer violates the task at hand, however IPexpert hasn't responded so who knows.
-----Original Message----- From: Alef [mailto:[email protected]] Sent: Thursday, June 23, 2011 8:32 AM To: [email protected] IE; Di Bias, Steve Subject: Re: CCIE_RS Digest, Vol 65, Issue 54 Hi Steve, I believe technically it would, but there is no other way around it. You need to achieve that target rate, and the calculated values are derived of that. I believe in my lab excess traffic burst was set to 0 as well, and altered too. Nothing you can do about it. Alef > > Content-Type: text/plain; charset="us-ascii" > > Hey Experts! > > In Volume 1 Task 23.4 we are asked to configure GTS and shouldn't allow > excess traffic bursts > > The way I interpreted this is that we need to configure excess as a "0", does > that sound right? For example, if we only configure the target bit rate, the > other values will be automagically configured for us by Cisco IOS. Doesn't > this violate the task? > > > For example the DSG shows the following configuration by just configuring the > target bit rate > > R4(config)#inter s0/1/0.24 > R4(config-subif)# bandwidth 64 > R4(config-subif)# traffic-shape group 101 9600 > R4(config-subif)# traffic-shape group 102 32000 > R4(config-subif)# traffic-shape group 103 22400 > > However let's look at the interface configuration we can see the numbers were > automagically configured which in my eyes vilolates the task > > interface Serial0/1/0.24 point-to-point > bandwidth 64 > ip address 150.50.24.1 255.255.255.252 > traffic-shape group 101 9600 7968 7968 1000 > traffic-shape group 102 32000 8000 8000 1000 > traffic-shape group 103 22400 7952 7952 1000 > > My end config looked like this > > interface Serial0/1/0.24 point-to-point > bandwidth 64 > ip address 150.50.24.1 255.255.255.252 > traffic-shape group 101 9600 7968 0 1000 > traffic-shape group 102 32000 8000 0 1000 > traffic-shape group 103 22400 7952 0 1000 > > If someone can shed some light on this it would be much appreciated! > > UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
