Was OSPF up before the loopback was? What about restarting OSPF (ie clear ip ospf process etc) after the wrong RID is elected?
Cheers, Matt CCIE #22386 CCSIE #31207 On 12 July 2011 18:16, Alef <[email protected]> wrote: > I have this very strange problem and it drives me nuts. I have a 3 way frame > relay cloud with R2, R5 and R6 with R2 being the hub (akin to the day 4 > security lab if you use the BLS video's). > > The fr cloud uses 100.100.100.0/29 > For some messed up reason, R5 ALWAYS chooses it's serial1/0 ip address, > 100.100.100.5, instead of it's configured loopback address 5.5.5.5. No RID > has been set. R2 and R6 choose their loopback fine. > > I cannot seem to figure out why it does this. I tried shutting down the > serial, removing the loopback, putting it back in, etc. > > I'd rather not set the RID manually, i want to know why it exhibits this > behaviour. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
