Hey Marc, this is actually good to know and reminds me of the latest Catalyst IOS builds which use the dot1x pae authenticator vs the dot1x port control commnds (also good to know if you come across this in your lab)
Thanks for sharing! marc abel <[email protected]> wrote: This has been driving me crazy for a while now so I thought I would share. The command "no ppp chap ignoreus" instructs ppp to not ignore updates it sees with it's own hostname. This is necessary if both sides have the same sent hostname. However it appears as if this is actually an undocumented command int 12.4(24)T Router(config-if)#no ppp chap ? hostname Set alternate CHAP hostname password Set default CHAP password refuse Refuse to authenticate using CHAP wait Wait for caller to authenticate first Router(config-if)#no ppp chap ignoreus Router(config-if)# Router(config-if)#do show ver Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T -Marc _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
