Hi Abdel, Thanks for your reply. I noticed they use .3, and in the configs i loaded from proctorlabs they use .2 for R2 and .3 for R4.
rgds On Jul 21, 2011, at 8:19 AM, Abdel el Anazi wrote: > your addressing should be on R2 172.16.24.0/31 and 172.16.24.1/31 on R4 > > > 2011/7/20 Alef <[email protected]> > I was wondering what kind if anyone did this lab recently, if you still > remember what subnet you put the /31 link between R2 and R4 on ? > > The dsg says 172.16.24.2/31 and 172.16.24.4/31 in task 2.1 but that would not > be correct. In a later task 3.3 i see that network 172.16.24.3 0.0.0.0 is > advertised, and i see that in output as well. > > /31 should be either 1 or 2 or 3 or 4 etc > > But that ofcourse has nothing to do with this: > Jul 20 19:46:25.138: IP-EIGRP(Default-IP-Routing-Table:256): Neighbor > 172.16.24.4 not on common subnet for Serial0/1/0.4 > > I keep getting that message in eigrp on various routers. I think it has to do > with R2 being the hub, and i was wondering if it is harmless or not. All my > peers are configured correctly, although i don't have full reachability yet. > I guess if R5 says that R4 is not on a common subnet it makes sense, as it > not. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
