that should work either :)
2011/7/21 Alef <[email protected]> > Hi Abdel, > Thanks for your reply. I noticed they use .3, and in the configs i loaded > from proctorlabs they use .2 for R2 and .3 for R4. > > rgds > On Jul 21, 2011, at 8:19 AM, Abdel el Anazi wrote: > > your addressing should be on R2 172.16.24.0/31 and 172.16.24.1/31 on R4 > > > 2011/7/20 Alef <[email protected]> > >> I was wondering what kind if anyone did this lab recently, if you still >> remember what subnet you put the /31 link between R2 and R4 on ? >> >> The dsg says 172.16.24.2/31 and 172.16.24.4/31 in task 2.1 but that would >> not be correct. In a later task 3.3 i see that network 172.16.24.3 0.0.0.0 >> is advertised, and i see that in output as well. >> >> /31 should be either 1 or 2 or 3 or 4 etc >> >> But that ofcourse has nothing to do with this: >> Jul 20 19:46:25.138: IP-EIGRP(Default-IP-Routing-Table:256): Neighbor >> 172.16.24.4 not on common subnet for Serial0/1/0.4 >> >> I keep getting that message in eigrp on various routers. I think it has to >> do with R2 being the hub, and i was wondering if it is harmless or not. All >> my peers are configured correctly, although i don't have full reachability >> yet. I guess if R5 says that R4 is not on a common subnet it makes sense, as >> it not. >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
