I'm having a bit of difficulty getting a frame interface to come up
between R4 and R6 and I am not sure why.
R4
_________________________
interface Serial0/0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0/0.45 point-to-point
ip address 166.4.5.4 255.255.255.224
frame-relay interface-dlci 405
!
interface Serial0/0/0.46 point-to-point
ip address 166.4.6.6 255.255.255.224
frame-relay interface-dlci 406
!
R6
____________________
interface Serial0/1/0
no ip address
encapsulation frame-relay
frame-relay lmi-type cisco
!
interface Serial0/1/0.64 multipoint
ip address 166.4.6.6 255.255.255.224
frame-relay interface-dlci 604
!
interface Serial0/1/0.65 multipoint
ip address 166.5.6.6 255.255.255.224
frame-relay interface-dlci 605
!
R4(config-if)#do show ip int br
Interface IP-Address OK? Method Status
Protocol
Serial0/0/0 unassigned YES manual up up
Serial0/0/0.45 166.4.5.4 YES manual up up
Serial0/0/0.46 166.4.6.4 YES manual up up
Serial0/0/0.45 (up): point-to-point dlci, dlci 405(0x195,0x6450), broadcast
status defined, active
Serial0/0/0.46 (up): point-to-point dlci, dlci 406(0x196,0x6460), broadcast
status defined, active
R6#show ip int br
Interface IP-Address OK? Method Status
Protocol
Serial0/1/0 unassigned YES manual up up
Serial0/1/0.64 166.4.6.6 YES manual up up
Serial0/1/0.65 166.5.6.6 YES manual up up
R6(config-if)#do show frame map
Serial0/1/0.65 (up): ip 166.5.6.5 dlci 605(0x25D,0x94D0), dynamic,
broadcast,, status defined, active
DLCI = 604, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/1/0.64
input pkts 42 output pkts 15 in bytes 10422
out bytes 510 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 15 out bcast bytes 510
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:17:04, last time pvc status changed 00:00:09
Any ideas?
Thanks,
Marc
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
