Hey Marc, Check out your LMI types.
cheers, Ben. From: marc abel <[email protected]<mailto:[email protected]>> Date: Sat, 23 Jul 2011 12:51:32 +1000 To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [OSL | CCIE_RS] Frame relay problem I'm having a bit of difficulty getting a frame interface to come up between R4 and R6 and I am not sure why. R4 _________________________ interface Serial0/0/0 no ip address encapsulation frame-relay ! interface Serial0/0/0.45 point-to-point ip address 166.4.5.4 255.255.255.224 frame-relay interface-dlci 405 ! interface Serial0/0/0.46 point-to-point ip address 166.4.6.6 255.255.255.224 frame-relay interface-dlci 406 ! R6 ____________________ interface Serial0/1/0 no ip address encapsulation frame-relay frame-relay lmi-type cisco ! interface Serial0/1/0.64 multipoint ip address 166.4.6.6 255.255.255.224 frame-relay interface-dlci 604 ! interface Serial0/1/0.65 multipoint ip address 166.5.6.6 255.255.255.224 frame-relay interface-dlci 605 ! R4(config-if)#do show ip int br Interface IP-Address OK? Method Status Protocol Serial0/0/0 unassigned YES manual up up Serial0/0/0.45 166.4.5.4 YES manual up up Serial0/0/0.46 166.4.6.4 YES manual up up Serial0/0/0.45 (up): point-to-point dlci, dlci 405(0x195,0x6450), broadcast status defined, active Serial0/0/0.46 (up): point-to-point dlci, dlci 406(0x196,0x6460), broadcast status defined, active R6#show ip int br Interface IP-Address OK? Method Status Protocol Serial0/1/0 unassigned YES manual up up Serial0/1/0.64 166.4.6.6 YES manual up up Serial0/1/0.65 166.5.6.6 YES manual up up R6(config-if)#do show frame map Serial0/1/0.65 (up): ip 166.5.6.5 dlci 605(0x25D,0x94D0), dynamic, broadcast,, status defined, active DLCI = 604, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/1/0.64 input pkts 42 output pkts 15 in bytes 10422 out bytes 510 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 15 out bcast bytes 510 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 00:17:04, last time pvc status changed 00:00:09 Any ideas? Thanks, Marc _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
