PPP :-) On Jul 26, 2011, at 10:36 AM, Rob Pool wrote:
> I believe that's the case if you have your encapsulation set to frame-relay. > However, if it's a straight up serial link running the default HDLC > encapsulation then it's essentially a P2P link. So my question is, in your > example, what did you have the encapsulation on s0/2/0 set to? > > Sent from my iPhone > > On Jul 26, 2011, at 5:14 AM, Alef <[email protected]> wrote: > >> I thought ospf default type for physical or multipoint was non broadcast >> yet when i have a serial link connecting two routers it does define it as >> P2P. >> >> Does it do this because there are only 2 routers in the subnet/area ? >> >> R2(config-if)#do sh ip ospf int brief >> Interface PID Area IP Address/Mask Cost State Nbrs F/C >> Se0/2/0 1 0 172.29.25.2/24 64 P2P 1/1 >> Se0/1/0.256 1 0 172.29.26.2/29 64 DR 2/2 >> >> Alef >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
