:-) Sent from my iPhone
On Jul 26, 2011, at 5:43 AM, Alef <[email protected]> wrote: > PPP :-) > > On Jul 26, 2011, at 10:36 AM, Rob Pool wrote: > >> I believe that's the case if you have your encapsulation set to frame-relay. >> However, if it's a straight up serial link running the default HDLC >> encapsulation then it's essentially a P2P link. So my question is, in your >> example, what did you have the encapsulation on s0/2/0 set to? >> >> Sent from my iPhone >> >> On Jul 26, 2011, at 5:14 AM, Alef <[email protected]> wrote: >> >>> I thought ospf default type for physical or multipoint was non broadcast >>> yet when i have a serial link connecting two routers it does define it as >>> P2P. >>> >>> Does it do this because there are only 2 routers in the subnet/area ? >>> >>> R2(config-if)#do sh ip ospf int brief >>> Interface PID Area IP Address/Mask Cost State Nbrs F/C >>> Se0/2/0 1 0 172.29.25.2/24 64 P2P 1/1 >>> Se0/1/0.256 1 0 172.29.26.2/29 64 DR 2/2 >>> >>> Alef >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
