Anyone, This DHCP configuration is as follows. Does anyone know where to find this in the DocCD should this be on the lab and we don't know exactly how to configure it? Do we have to have this procedure memorized or we will lose the points? Does anyone know if the debug has to be done to get the string? I recall Marko using the MAC address of the remote interface and pasted that in when configuring the client-identifier.
6.1 R2 --- //dhcp snooping was configured on vlan21 in an earlier task R2 --- ip dhcp pool VLAN21 netw 70.18.21.0 /24 update arp exit ! ip dhcp pool Cat1 host 70.18.21.10 255.255.255.0 update arp ! int f0/0.21 ip dhcp relay info trusted ! debug ip dhcp server packet //get the information (sting of digits, then you can paste it into) ip dhcp pool Cat1 client-identifier f.2d30.3030.642e.3238.3866.2e30.3330.302d.566c.3231 Cat1 ----- int fa0/2 ip dhcp snooping trust int vlan 21 ip add dhcp Thank you, Chris _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
