Same config works with Avaya, but the phone will not pick up the VVLAN over CDP. It will need to be specified via manual programming or a DHCP scope option in the data VLAN.
Trust settings will not work. The 'extend cos' function also does not work, I don't think since I think that also relies on communication with the phone. Avaya QoS settings default differently than Cisco, so you will need to tweak one side or the other to get signal markings to match up. I spent a few years working as an escalation field engineer for Avaya. Bob -- Sent from my iPhone, please excuse any typos. On Jan 7, 2012, at 5:30 AM, Mahmoud Nossair <[email protected]> wrote: > Dear Experts > > > > How could I configure Cisco Switches to operate with AVAYA ip telephony, > Suppose I have two VLANs (Data VLAN 28 and Voice VLAN 29)?????? > > > > For cisco ip telephony I know this configuration: > > > > interface FastEthernet1/0/2 > description 46xx phone > switchport access vlan 90 > switchport mode access > switchport voice vlan 100 > no shut > > > > what is equivalent configuration for AVAYA IP telephony on cisco switches? > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
