Hi fellas,
Can anyone of you please help me to find what is going on with this
command, that is called " variance " ? although I have entered the command
as follows:
router eigrp 1001 ----- for R5, however when I do sh ip route |
100.100.100.0 I see only one exit route (150.100.25.2) not two
routes (150.100.100.2)
variance 2
R5(config-if)#do sir 100.100.100.0
Routing entry for 100.100.100.0/24
Known via "eigrp 1001", distance 90, metric 20595200, type internal
Redistributing via eigrp 1001
Last update from 150.100.25.2 on Serial0/2, 00:01:29 ago
Routing Descriptor Blocks:
* 150.100.25.2, from 150.100.25.2, 00:01:29 ago, via Serial0/2
Route metric is 20595200, traffic share count is 1
Total delay is 23250 microseconds, minimum bandwidth is 128 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2
However I am suppose to see two output as showed below, instead the above
output can anyone elaborates on that
150.100.25.2 (Serial0/2), from 150.100.25.2, Send flag is 0x0
Composite metric is (20595200/307200), Route is Internal
Vector metric:
Minimum bandwidth is 128 Kbit
Total delay is 23250 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 2
150.100.100.2 (Serial0/0.56), from 150.100.100.2, Send flag is 0x0
Composite metric is (45171200/307200), Route is Internal
Vector metric:
Minimum bandwidth is 64 Kbit
Total delay is 202000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 2
many thanks,
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
