Your delay on the s0/1/0 link to the frame-relay cloud is too high, I guess it has been manually set as "delay 20200", set it to default value of "delay 2000", then apply variance 2, it should be working fine!!
________________________________ From: ankit thakrar <[email protected]> To: khaled al-ajeman <[email protected]> Cc: [email protected] Sent: Sunday, 29 January 2012 12:39 PM Subject: Re: [OSL | CCIE_RS] volume 1 - 9.6 Try with Variance 3. If you check FD 20595200 *2 < 45171200 that might be the reason you are not seeing both the routes. Regards, Ankit On Sun, Jan 29, 2012 at 12:11 PM, khaled al-ajeman < [email protected]> wrote: > Hi fellas, > > Can anyone of you please help me to find what is going on with this > command, that is called " variance " ? although I have entered the command > as follows: > > router eigrp 1001 ----- for R5, however when I do sh ip route | > 100.100.100.0 I see only one exit route (150.100.25.2) not two > routes (150.100.100.2) > variance 2 > > R5(config-if)#do sir 100.100.100.0 > Routing entry for 100.100.100.0/24 > Known via "eigrp 1001", distance 90, metric 20595200, type internal > Redistributing via eigrp 1001 > Last update from 150.100.25.2 on Serial0/2, 00:01:29 ago > Routing Descriptor Blocks: > * 150.100.25.2, from 150.100.25.2, 00:01:29 ago, via Serial0/2 > Route metric is 20595200, traffic share count is 1 > Total delay is 23250 microseconds, minimum bandwidth is 128 Kbit > Reliability 255/255, minimum MTU 1500 bytes > Loading 1/255, Hops 2 > However I am suppose to see two output as showed below, instead the above > output can anyone elaborates on that > > 150.100.25.2 (Serial0/2), from 150.100.25.2, Send flag is 0x0 > Composite metric is (20595200/307200), Route is Internal > Vector metric: > Minimum bandwidth is 128 Kbit > Total delay is 23250 microseconds > Reliability is 255/255 > Load is 1/255 > Minimum MTU is 1500 > Hop count is 2 > 150.100.100.2 (Serial0/0.56), from 150.100.100.2, Send flag is 0x0 > Composite metric is (45171200/307200), Route is Internal > Vector metric: > Minimum bandwidth is 64 Kbit > Total delay is 202000 microseconds > Reliability is 255/255 > Load is 1/255 > Minimum MTU is 1500 > Hop count is 2 > > > many thanks, > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
