What does the rib say about the routes? Ospf database? Joe On Feb 16, 2012 12:17 AM, "khaled al-ajeman" <[email protected]> wrote:
> Hi there, > > This is regarding question 10.18 can anyone please tell me why I am not > being able to see the default route 0.0.0.0 of cat1? Even though, my > configurations are right and it is working fine. below are my > configuration: > > R8 > > track 1 ip route 100.100.100.0 255.255.255.0 reachability > ! > track 2 ip route 100.100.250.0 255.255.255.0 reachability > ! > track 3 list boolean and > object 1 > object 2 > > ip route 8.8.8.8 255.255.255.255 Null0 track 3 > ! > access-list 8 permit 8.8.8.8 > route-map OSPF2Default permit 10 > match ip address 8 > router ospf 1 > log-adjacency-changes > area 78 stub > redistribute ospf 2 subnets > passive-interface default > no passive-interface FastEthernet0/0 > no passive-interface Serial0/0 > no passive-interface Tunnel0 > network 100.100.200.0 0.0.0.255 area 200 > network 150.100.78.0 0.0.0.255 area 78 > network 150.100.81.0 0.0.0.255 area 78 > network 150.100.178.0 0.0.0.255 area 0 > default-information originate route-map OSPF2Default > > THANKS to you all > > khaled > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
