Try adding the "always" keyword -- without it OSPF is looking for a default-route to exist in the RIB. Unless of course you have a default in the RIB.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of khaled al-ajeman Sent: Thursday, February 16, 2012 2:02 AM To: [email protected] Subject: [OSL | CCIE_RS] volume 1 lab 10 Hi there, This is regarding question 10.18 can anyone please tell me why I am not being able to see the default route 0.0.0.0 of cat1? Even though, my configurations are right and it is working fine. below are my configuration: R8 track 1 ip route 100.100.100.0 255.255.255.0 reachability ! track 2 ip route 100.100.250.0 255.255.255.0 reachability ! track 3 list boolean and object 1 object 2 ip route 8.8.8.8 255.255.255.255 Null0 track 3 ! access-list 8 permit 8.8.8.8 route-map OSPF2Default permit 10 match ip address 8 router ospf 1 log-adjacency-changes area 78 stub redistribute ospf 2 subnets passive-interface default no passive-interface FastEthernet0/0 no passive-interface Serial0/0 no passive-interface Tunnel0 network 100.100.200.0 0.0.0.255 area 200 network 150.100.78.0 0.0.0.255 area 78 network 150.100.81.0 0.0.0.255 area 78 network 150.100.178.0 0.0.0.255 area 0 default-information originate route-map OSPF2Default THANKS to you all khaled _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Anheuser-Busch InBev Email Disclaimer www.ab-inbev.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
