I seem to be having an issue with PPP Multilink interleaving, I have tried
putting the config on the multi-link interface and the virtual-template and
neither seems to make a difference. What am I doing wrong?
Thanks in advance.
Multilink1
Bundle name: R3
Remote Endpoint Discriminator: [1] R1
Local Endpoint Discriminator: [1] R3
Bundle up for 00:03:01, total bandwidth 128, load 1/255
Receive buffer limit 12000 bytes, frag timeout 1000 ms
* Interleaving disabled*
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x89 received sequence, 0x83 sent sequence
Member links: 1 active, 1 inactive (max not set, min not set)
Vi1, since 00:03:01, 128 weight, 118 frag size
Vt1 (inactive)
No inactive multilink interfaces
Config for one side (both sides mirror each other)
interface Multilink1
bandwidth 128
ip unnumbered Loopback0
ppp multilink
ppp multilink interleave
ppp multilink group 1
ppp multilink endpoint hostname
ppp multilink fragment delay 8
!
interface Serial0/0/0
no ip address
encapsulation frame-relay
clock rate 2000000
no arp frame-relay
frame-relay traffic-shaping
no frame-relay inverse-arp
!
interface Serial0/0/0.223 point-to-point
snmp trap link-status
frame-relay interface-dlci 223 ppp Virtual-Template1
class FRTS
!
!
interface Virtual-Template1
bandwidth 128
no ip address
ppp multilink
ppp multilink interleave
ppp multilink group 1
ppp multilink fragment delay 8
!
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
