Ah that was exactly it. Thank you! On Sun, Feb 19, 2012 at 1:50 PM, Thomas Raabo - Zitcom A/S <[email protected]>wrote:
> You need queing on the interface. > > This can be done in a number of ways of course :) > > Int mu1 > Fair-queue > > Or some CBWFQ > > .... try it > > Thomas > > > > Med venlig hilsen | Best regards > Thomas Raabo > Senior Network Engineer CCIE #33466 > > > > _____________________________________________ > [email protected] | Direkte: +45 69 10 60 18 | Tlf.: +45 70 23 55 66 > > -----Oprindelig meddelelse----- > Fra: [email protected] [mailto: > [email protected]] På vegne af marc abel > Sendt: 19. februar 2012 20:07 > Til: [email protected] > Emne: [OSL | CCIE_RS] PPP Multilink Interleaving > > I seem to be having an issue with PPP Multilink interleaving, I have tried > putting the config on the multi-link interface and the virtual-template and > neither seems to make a difference. What am I doing wrong? > > Thanks in advance. > > Multilink1 > Bundle name: R3 > Remote Endpoint Discriminator: [1] R1 > Local Endpoint Discriminator: [1] R3 > Bundle up for 00:03:01, total bandwidth 128, load 1/255 > Receive buffer limit 12000 bytes, frag timeout 1000 ms > * Interleaving disabled* > 0/0 fragments/bytes in reassembly list > 0 lost fragments, 0 reordered > 0/0 discarded fragments/bytes, 0 lost received > 0x89 received sequence, 0x83 sent sequence > Member links: 1 active, 1 inactive (max not set, min not set) > Vi1, since 00:03:01, 128 weight, 118 frag size > Vt1 (inactive) > No inactive multilink interfaces > > > Config for one side (both sides mirror each other) > > interface Multilink1 > bandwidth 128 > ip unnumbered Loopback0 > ppp multilink > ppp multilink interleave > ppp multilink group 1 > ppp multilink endpoint hostname > ppp multilink fragment delay 8 > ! > interface Serial0/0/0 > no ip address > encapsulation frame-relay > clock rate 2000000 > no arp frame-relay > frame-relay traffic-shaping > no frame-relay inverse-arp > ! > interface Serial0/0/0.223 point-to-point snmp trap link-status > frame-relay interface-dlci 223 ppp Virtual-Template1 > class FRTS > ! > ! > interface Virtual-Template1 > bandwidth 128 > no ip address > ppp multilink > ppp multilink interleave > ppp multilink group 1 > ppp multilink fragment delay 8 > ! > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
