No reason to toggle back and forth, the lab is all about expediency. That, and with the small network we're working with there shouldn't be any real load on the routers.
However, do be wary of what debug commands you use because you could cause yourself to be unable to do a "undebug all" if you choose the wrong debug command and have it display to the console rather than the buffer. Les On Sat, Apr 14, 2012 at 6:42 AM, Benny Sumardy <[email protected]> wrote: > > Hi Guys, > > Is there any harm / bad effect on the Exam Lab if we always use the "Show" > command from router(config)# mode (using "do show .."), rather than router# > mode, so we don't have to toggle back and forth between config terminal > mode and privilege# mode. > > I'm asking these because I remembered was prohibited by my past Employers > to use show command on config-terminal mode, because it will increase some > load on routers CPU. Hence might risk the router to crash/reboot (in case > of any bugs). > > Cheers > Ben > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Les Waller, Network Engineer Home Page: www.leswaller.com MBA, CISSP, CCNP _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
