Greetings,
The 1224 is connected to the TSU100e with a T1x. The cable is cat5 and
about 3 feet long. Here's the setup:
1. TSU provides telco layer 1 timing
2. TSU and 1224 have 1 DS0 allocated, HDLC
3. TSU DS0 timing is set to internal
4. Behind the 1224 is the following Dynamips setup
1. 4 3725's w/16FE acting as switches
2. 7 3725's
3. 3 1900's
4. 2 ASA's
5. Behind the TSU100 is the following physical gear
1. 1 4000 w/4 Serial and 1 tokenring
2. 3 2500's
When the T1 is up I can ping from tip to tail and everything is cool, then
for some unknown reason the T1 goes down. It might be becuase I bumped the
cable but I'm not sure...but once it goes down it's a full on production
with snake charmers, belly dancers, and tibetin monks to get it back up and
I can't figure out why.
Any thoughts or guidance?
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
