Hi all,
real life scenario here, hope you can help. Running eigrp and I should be
advertising some networks out but I don't, well the device dosen't. Below is
the relevant config. The problem is on vlan 692.
I am not redistributing connected. You can see that for vlan 691 it's all good,
but for 692, I get 0 successors, FD is Inaccessible. Any ideas? Many thanks.
Building configuration...
Current configuration : 252 bytes
!
interface Vlan692
ip address 172.31.90.30 255.255.255.224
standby 1 ip 172.31.90.1
standby 1 priority 255
standby 1 preempt
end
MLSWITCH#sh ip route 172.31.90.0
Routing entry for 172.31.90.0/27
Known via "connected", distance 0, metric 0 (connected, via interface)
Redistributing via eigrp 1
Routing Descriptor Blocks:
MLSWITCU#sh ip eigrp topology all-links | beg 172.31.90.0
P 172.31.90.0/27, 0 successors, FD is Inaccessible, serno 0
via 192.168.219.105 (3072/2816), GigabitEthernet5/1
via 172.31.157.130 (3072/2816), Vlan690
Building configuration...
Current configuration : 202 bytes
!
interface Vlan691
ip address 172.31.91.254 255.255.255.0
no ip redirects
no ip proxy-arp
standby 51 ip 172.31.91.1
standby 51 priority 254
standby 51 preempt
end
MLSWITCH#sh ip route 172.31.91.0
Routing entry for 172.31.91.0/24
Known via "connected", distance 0, metric 0 (connected, via interface)
Redistributing via eigrp 1
Routing Descriptor Blocks:
* directly connected, via Vlan691
Route metric is 0, traffic share count is 1
MLSWITCH#sh ip eigrp topology all-links | beg 172.31.91.0
P 172.31.91.0/24, 1 successors, FD is 2816, serno 210256
via Connected, Vlan691
via 172.31.157.130 (3072/2816), Vlan690
router eigrp 1
network 172.31.89.0 0.0.0.255
network 172.31.90.0 0.0.0.31
network 172.31.90.64 0.0.0.63
network 172.31.91.0 0.0.0.255
network 172.31.157.128 0.0.0.7
network 192.168.219.104 0.0.0.3
network 192.168.219.108 0.0.0.3
network 192.168.238.104 0.0.0.0
passive-interface default
no passive-interface GigabitEthernet5/1
no passive-interface TenGigabitEthernet5/4
no passive-interface GigabitEthernet5/2
no passive-interface Vlan690
System image file is
"sup-bootdisk:s72033-adventerprisek9_wan-mz.122-33.SXI4.bin"
cisco WS-C6506-E (R7000) processor (revision 1.2) with 983008K/65536K bytes of
memory.
Fulvio
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
